SSL VPN

Owned by Former user (Deleted)
Last updated: 15 December 2023 by Troy Wallace
3 min read

 

Armor offers one free SSL VPN user per account.

To fully use this screen, you must have the following permissions assigned to your account:

  • Write SSL VPN Devices and Users

  • Read SSL VPN Devices and Users

  • Read Virtual Data Centers

 

Cisco AnyConnect VPN

Enable Your SSL VPN Access

To enroll in Cisco AnyConnect, please contact Armor Support via ticket or live chat at amp.armor.com or via phone (US: +1) 877 262 3473 or (UK: +44) 800 500 3167. We are here to help.

 

 

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click SSL VPN.

  3. Click Members.

  4. Click the plus ( + ) icon.

  5. In the field, enter and select the name of the user, or their email address.

  6. Mark the desired data center or data centers that the user can connect to.

  7. Click Submit.

    • The newly added user will appear in the table; the table is organized in alphabetical order, based on the first name of the user.

  8. Log into the client.

    • Your SSL VPN login credentials are the same credentials you use to access the Armor Management Portal (AMP).

Disable SSL VPN for your user

 

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure. 

  2. Click SSL VPN. 

  3. Click Members.

  4. In the top bar, select the desired data center. 

  5. Locate and hover over the desired user.

  6. Click the trash icon that appears. 

  7. Click Remove Access. 

 

Download and install the Cisco AnyConnect SSL VPN client

The Cisco AnyConnect Client is used to create a secure connection from your local computer to your Secure Cloud Servers within Armor's environment.

  1. Download the client. Select the link that corresponds to your operating system:

  2. Once the file has downloaded, run the installer, and then follow the on-screen prompt.

  3. If you have any issues downloading or installing the AnyConnect client, please contact Armor Support through the Armor Ticketing System.

Connect to Cisco AnyConnect SSL VPN client

  1. In your local machine, open the Cisco AnyConnect Client.

  2. Verify and select the correct hostname:



  3. Enter your VPN credentials.

  4. Click Connect.

    • You will be connected via multi-factor authentication (MFA). Answer the phone call from Armor, and then follow the instructions.

Troubleshooting

Troubleshooting SSL VPN

 

Archived Search

Log Search for VMWare SSL VPN

Please see the Log Search documentation for more information.

Field

Filter by

Field

Filter by

nsx_edge.sslvpn.action

This indicates the action taken. Those listed below are the only ones of interest.

  • login success

  • session logout success

  • authentication failure

nsx_edge.sslvpn.log_level

This the log level from the Edge Gateway

nsx_edge.sslvpn.local_ip

The IP address of the client

nsx_edge.sslvpn.timestamp

The timestamp of the action

nsx_edge.sslvpn.username

The username of user taking the action

nsx_edge.sslvpn.virtual_ip

The IP Address assigned to the user for that session




Topics Discussed