Page Comparison

1. As an administrator, open Powershell.

2. In the Armor Agent command line, run the following command to verify that the subagents are installed:

   Code Block

1. language

1. powershell

   Get-Service -displayname "trend*"

   Code Block

1. language

1. powershell

   C:\.armor\opt\armor show subagents

3. For Malware Protection, if Is Installed? is False, then run the following command to install the service:

   Code Block

3. language

3. powershell

   C:\.armor\opt\armor add malwareprotection

1. Obtain root access with (sudo -i).

2. Run the following command:

   Code Block

1. /opt/armor/armor show subagents

   Expand
   title Example Output
   Code Block theme Midnight $ /opt/armor/armor show subagents +------------------------+----------------+---------------+ | SUBAGENT | VERSION | IS INSTALLED? | +------------------------+----------------+---------------+ | Malware Protection | 11.3.0-376.el7 | true | | Monitoring | 2018.19.1-0.1 | true | | Logging | 6.6.2 | true | | WinLogging | | false | | Remote Support | 15.3.2 | true | | Vulnerability Scanning | 1565188176 | true | +------------------------+----------------+---------------+

2. For Malware Protection, if Is Installed? is False, then run the following command to install the service:

   Code Block

1. /opt/armor/armor add malwareprotection

1. As an administrator, open Powershell.

2. Run the following command to verify that Trend is running:

   Code Block

1. Get-Service -displayname "trend*"

   Expand
   title Example Output
   Code Block theme Midnight > Get-Service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Running Amsp Trend Micro Solution Platform Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier

1. Using "ps", run the following command to verify that the ds_agent is running:

   Code Block

1. ps aux | grep ds_agent | grep -v grep

2. The output should list several processes.

   Code Block

1. $ ps aux | grep ds_agent | grep -v grep root 11565 0.0 0.0 206360 636 ? S Aug16 0:00 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext root 12484 0.1 37.5 835836 381016 ? Sl Aug16 11:15 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext root 12626 0.0 0.0 147196 248 ? S Aug16 0:00 /opt/ds_agent/ds_am -g ../diag -v 5 -d /var/opt/ds_agent/am -P 1 -R root 12641 0.0 20.7 1312456 210840 ? Sl Aug16 3:14 /opt/ds_agent/ds_am -g ../diag -v 5 -d /var/opt/ds_agent/am -P 1 -R

2. If you do not receive any results, verify the service using systemctl:

   Code Block

1. systemctl status ds_agent

2. If the agent is running, then you will see that Active indicates that the process is active (running) in the logs:

   Expand
   title Expected output when ds_agent is running
   Code Block theme Midnight $ sudo systemctl status ds_agent ? ds_agent.service - LSB: Trend Micro Deep Security Agent Loaded: loaded (/etc/rc.d/init.d/ds_agent; bad; vendor preset: disabled) Drop-In: /etc/systemd/system/ds_agent.service.d ??allow_exit.conf Active: active (running) since Thu 2019-08-22 19:22:16 UTC; 1h 50min ago Docs: man:systemd-sysv-generator(8) Process: 16594 ExecStart=/etc/rc.d/init.d/ds_agent start (code=exited, status=0/SUCCESS) Main PID: 16612 (ds_agent) CGroup: /system.slice/ds_agent.service ??16612 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext ??16616 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext Aug 22 19:22:16 100-064-164-045 systemd[1]: Starting LSB: Trend Micro Deep Security Agent... Aug 22 19:22:16 100-064-164-045 ds_agent[16594]: Starting ds_agent: [ OK ] Aug 22 19:22:16 100-064-164-045 systemd[1]: Started LSB: Trend Micro Deep Security Agent.

3. If the ds_agent was stopped on purpose, then you will see the string "Stopping ds_agent: [ OK ]" in the logs:

   Expand
   title Expected output when ds_agent stopped correctly
   Code Block theme Midnight $ systemctl status ds_agent ? ds_agent.service - LSB: Trend Micro Deep Security Agent Loaded: loaded (/etc/rc.d/init.d/ds_agent; bad; vendor preset: disabled) Drop-In: /etc/systemd/system/ds_agent.service.d ??allow_exit.conf Active: inactive (dead) since Fri 2019-08-23 13:55:51 EDT; 5s ago Docs: man:systemd-sysv-generator(8) Process: 22612 ExecStop=/etc/rc.d/init.d/ds_agent stop (code=exited, status=0/SUCCESS) Main PID: 11565 (code=killed, signal=KILL) Aug 16 15:41:52 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Starting LSB: Trend Micro Deep Security Agent... Aug 16 15:41:52 ip-172-31-34-176.us-east-2.compute.internal ds_agent[11547]: Starting ds_agent: [ OK ] Aug 16 15:41:52 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Started LSB: Trend Micro Deep Security Agent. Aug 23 13:55:43 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Stopping LSB: Trend Micro Deep Security Agent... Aug 23 13:55:46 ip-172-31-34-176.us-east-2.compute.internal ds_agent[22612]: Stopping ds_agent: [ OK ] Aug 23 13:55:51 ip-172-31-34-176.us-east-2.compute.internal ds_agent[22612]: Unloading dsa_filter module... Aug 23 13:55:51 ip-172-31-34-176.us-east-2.compute.internal ds_agent[22612]: Unloading dsa_filter_hook module... Aug 23 13:55:51 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Stopped LSB: Trend Micro Deep Security Agent.

4. If the ds_agent was stopped due to the process crashing, or due to OOMM (Out Of Memory Manager) killing the process, then you will see the string "Stopping ds_agent: [FAILED]" in the logs:

   Expand
   title Expected output when ds_agent "killed" improperly
   Code Block theme Midnight $ systemctl status ds_agent ? ds_agent.service - LSB: Trend Micro Deep Security Agent Loaded: loaded (/etc/rc.d/init.d/ds_agent; bad; vendor preset: disabled) Drop-In: /etc/systemd/system/ds_agent.service.d ??allow_exit.conf Active: inactive (dead) since Fri 2019-08-23 15:24:54 EDT; 10s ago Docs: man:systemd-sysv-generator(8) Process: 29281 ExecStop=/etc/rc.d/init.d/ds_agent stop (code=exited, status=0/SUCCESS) Process: 28756 ExecStart=/etc/rc.d/init.d/ds_agent start (code=exited, status=0/SUCCESS) Main PID: 28777 (code=exited, status=0/SUCCESS) Aug 23 15:23:12 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Starting LSB: Trend Micro Deep Security Agent... Aug 23 15:23:12 ip-172-31-34-176.us-east-2.compute.internal ds_agent[28756]: Starting ds_agent: [ OK ] Aug 23 15:23:12 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Started LSB: Trend Micro Deep Security Agent. Aug 23 15:24:54 ip-172-31-34-176.us-east-2.compute.internal ds_agent[29281]: Stopping ds_agent: [FAILED] Aug 23 15:24:54 ip-172-31-34-176.us-east-2.compute.internal ds_agent[29281]: Unloading dsa_filter module... Aug 23 15:24:54 ip-172-31-34-176.us-east-2.compute.internal ds_agent[29281]: Unloading dsa_filter_hook module...

5. If the service is not running, then run the following command to start the service:

   Code Block

1. sudo systemctl start ds_agent

1. As an administrator, open

1. PowerShell.

2. Run the following command to verify that the Trend agent is able to connect to the required outbound IP addresses / ports:

1. Code Block
   tnc -computername 3a.epsec.armor.com -port 4119; tnc -computername 3a.epsec.armor.com -port 4120; tnc -computername 3a.epsec.armor.com -port 4122

   Expand
   title Expected Output
   Code Block theme Midnight > tnc -computername 3a.epsec.armor.com -port 4119; tnc -computername 3a.epsec.armor.com -port 4120; tnc -computername 3a.epsec.armor.com -port 4122 ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4119 InterfaceAlias : Ethernet0 SourceAddress : 100.64.164.44 TcpTestSucceeded : True ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4120 InterfaceAlias : Ethernet0 SourceAddress : 100.64.164.44 TcpTestSucceeded : True ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4122 InterfaceAlias : Ethernet0 SourceAddress : 100.64.164.44 TcpTestSucceeded : True

2. Review the output to ensure that there is a connection.

   Note
   For any failure connection, you must allow outbound connections to the following ports: TCP Port 4119 is required for installation of the malware protection agent. TCP Port 4120 is required for communication (hearbeats) to the Armor Trend Infrastructure. TCP Port 4122 is required for communication to Relays and for updates.

There are two options available for this test:

Option 1: From a Script File

1. Navigate to a directory where your user can execute permissions, such as the user's home directory:

   • cd ~

2. In this directory, create a new bash script file:

   • touch connectiontest.sh

3. In the text editor of your choice, edit this file to include the entire connection test script:

   • nano connectiontest.sh

   • vim connectiontest.sh

   • emacs connectiontest.sh

4. Save the file using the method dictated by your text editor of choice.

5. Add the executable bit to the file:

   • chmod +x connectiontest.sh

6. Execute the following script:

   • ./connectiontest.sh

Option 2: Directly from BASH

1. Type an open parenthesis:

   • (

2. Hit the Enter key.

3. Paste the entire connection test script.

4. Hit the Enter key.

5. Type a close parenthesis:

   • )

6. Hit the Enter key to run script.

#!/bin/bash
 
hosts1=(api.armor.com)
ports1=(443)
 
for host in "${hosts1[@]}"
do
  for port in "${ports1[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts2=(3a.epsec.armor.com)
ports2=(4119 4120 4122)
 
for host in "${hosts2[@]}"
do
  for port in "${ports2[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts3=(1a.log.armor.com 2a.log.armor.com)
ports3=(515)
 
for host in "${hosts3[@]}"
do
  for port in "${ports3[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts4=(1a.mon.armor.com 2a.mon.armor.com)
ports4=(8443)
 
for host in "${hosts4[@]}"
do
  for port in "${ports4[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts5=(1a.rs.armor.com)
ports5=(443)
 
for host in "${hosts5[@]}"
do
  for port in "${ports5[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts6=(endpoint.ingress.rapid7.com ca.endpoint.ingress.rapid7.com eu.endpoint.ingress.rapid7.com au.endpoint.ingress.rapid7.com ap.endpoint.ingress.rapid7.com)
ports6=(443)
 
for host in "${hosts6[@]}"
do
  for port in "${ports6[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
 
hosts7=(s3.amazonaws.com s3.ca-central-1.amazonaws.com s3.eu-central-1.amazonaws.com s3.ap-northeast-1.amazonaws.com s3-ap-southeast-2.amazonaws.com)
ports7=(443)
 
for host in "${hosts7[@]}"
do
  for port in "${ports7[@]}"
  do
    if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port"
    then
      echo -e "\e[32mSuccessfully connected to "$host":"$port""
    else
      echo -e "\e[31mFailed to connect to "$host":"$port""
    fi
  done
done
echo -e "\e[0mTest completed."

Successfully connected to api.armor.com:443
Successfully connected to 3a.epsec.armor.com:4119
Successfully connected to 3a.epsec.armor.com:4120
Successfully connected to 3a.epsec.armor.com:4122
Successfully connected to 1a.log.armor.com:515
Failed to connect to 2a.log.armor.com:515
Successfully connected to 1a.mon.armor.com:8443
Failed to connect to 2a.mon.armor.com:8443
Successfully connected to 1a.rs.armor.com:443
Successfully connected to endpoint.ingress.rapid7.com:443
Successfully connected to ca.endpoint.ingress.rapid7.com:443
Successfully connected to eu.endpoint.ingress.rapid7.com:443
Successfully connected to au.endpoint.ingress.rapid7.com:443
Successfully connected to ap.endpoint.ingress.rapid7.com:443
Successfully connected to s3.amazonaws.com:443
Successfully connected to s3.ca-central-1.amazonaws.com:443
Successfully connected to s3.eu-central-1.amazonaws.com:443
Successfully connected to s3.ap-northeast-1.amazonaws.com:443
Successfully connected to s3-ap-southeast-2.amazonaws.com:443

Successfully connected to api.armor.com:443
Successfully connected to 3a.epsec.armor.com:4119
Successfully connected to 3a.epsec.armor.com:4120
Successfully connected to 3a.epsec.armor.com:4122
Failed to connect to 1a.log.armor.com:515
Failed to connect to 2a.log.armor.com:515
Failed to connect to 1a.mon.armor.com:8443
Failed to connect to 2a.mon.armor.com:8443
Failed to connect to 1a.rs.armor.com:443
Successfully connected to endpoint.ingress.rapid7.com:443
Successfully connected to ca.endpoint.ingress.rapid7.com:443
Successfully connected to eu.endpoint.ingress.rapid7.com:443
Successfully connected to au.endpoint.ingress.rapid7.com:443
Successfully connected to ap.endpoint.ingress.rapid7.com:443
Successfully connected to s3.amazonaws.com:443
Successfully connected to s3.ca-central-1.amazonaws.com:443
Successfully connected to s3.eu-central-1.amazonaws.com:443
Successfully connected to s3.ap-northeast-1.amazonaws.com:443
Successfully connected to s3-ap-southeast-2.amazonaws.com:443

If your output does not match the Expected Output from Registered Server output, please verify your firewall rules allow the host/port combinations required for Armor Anywhere to function, as listed in ANYWHERE Pre-Installation.

1. As an administrator, open PowerShell.

2. Run the following command:

   Code Block

1. & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_query" -c GetComponentInfo

   When this error is encountered, the output will be limited.

   Expand
   title Example of failed output
   Code Block theme Midnight > & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_query" -c GetComponentInfo Component.AM.mode: not-capable Component.FWDPI.driverState: 3 Component.LI.mode: off

2. If the above command failed, verify that Anti-Malware has been installed.

3. If you do not see the C:\Program files\Trend Micro folder, then remove and re-install Malware protection, and then reboot after 10 minutes.

   Code Block

1. C:\.armor\opt\armor remove antimalware C:\.armor\opt\armor add antimalware

2. As an administrator, open PowerShell,

1. run the following command to confirm that the service is running successfully:

   Code Block

1. get-service -displayname "trend*"

2. If the service is in a bad state, then your output will match the following example, with only 3 services listed. This output indicates that the AMSP service is not installed, and that the agent is currently running in a limited capacity. In this case, you may have not received a policy or your agent has not been activated.

   Code Block

1. > get-service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier

2. If your agent did not activate, then run the following command:

   Code Block

1. C:\.armor\opt\armor add malwareprotection

2. After 5 minutes, reboot the service.

3. After the reboot, verify that your services are running, which should return the following output:

   Code Block

1. > get-service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Running Amsp Trend Micro Solution Platform Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier

2. If you do not see the AMSP service, then contact Armor Support. Within the ticket, be sure to provide all of the information / results that you have gathered so far.

1. Run the following command to determine if a component of the anti-malware agent did not install correctly:

   Code Block

1. sudo /opt/ds_agent/dsa_query -c GetComponentInfo

2. If the components were installed correctly, then you will see an output similar to the following:

   Expand
   title Expected Output
   Code Block theme Midnight $ sudo /opt/ds_agent/dsa_query -c GetComponentInfo Component.AM.cap.Qrestore: true Component.AM.cap.realtime: true Component.AM.cap.spyware: false Component.AM.configurations: 2 Component.AM.driverOffline: false Component.AM.licenseExpiry: 1882211783 Component.AM.mode: on Component.AM.moduleStatus: 0 Component.AM.scan.Manual: 6 Component.AM.scan.Quick: 6 Component.AM.scan.Realtime: 5 Component.AM.scanStatus: 4 Component.AM.scanType: 0 Component.AM.version.pattern.VSAPI: 15.313.00 Component.CORE.version: 11.3 Component.FWDPI.dpiRules: 151 Component.FWDPI.driverState: 3 Component.FWDPI.firewallMode: on-tap Component.FWDPI.mode: on-tap Component.IM.highestEntityId: 37184 Component.IM.imScanType: 0 Component.IM.mode: on Component.IM.pendingScanBitmask: 0 Component.IM.percentComplete: 0 Component.IM.rules: 25 Component.IM.scanStatus: 4 Component.IM.scanType: 1 Component.LI.mode: off Component.WRS.mode: off

3. Verify that the command line Component.AM.mode: is on, and not not-capable.

4. If the previously run command returns the following output, you will need to reinstall the malwareprotection sub-agent.

   Code Block

1. $ sudo /opt/ds_agent/dsa_query -c GetComponentInfo Component.AM.mode: not-capable Component.FWDPI.driverState: 3 Component.LI.mode: off

2. Run the following commands to re-install the malwareprotection subagent:

   Code Block

1. sudo /opt/armor/armor remove malwareprotection sudo /opt/armor/armor add malwareprotection

2. After the re-installation process is complete, you must wait between 30 minutes to an hour to download and update the agent's components. You can then run the following command to confirm the desired results:

   Code Block

1. sudo /opt/ds_agent/dsa_query -c GetComponentInfo

2. If you still see an error, then contact Armor Support. Within the ticket, paste the output from the following command:

1. Information Gathering Script for Escalations

   Code Block

   echo "-----------------Start-of-Armor-Troubleshooting-Script-Output-------------------" ; uptime ; sudo /opt/armor/armor show db | grep -i -e "coreinstanceid" -e "accountid" ; sudo /opt/ds_agent/dsa_query -c GetAgentStatus | grep -i -e "AgentStatus.pluginDownloadInProgress:" -e "AgentStatus.agentState:" -e "AgentStatus.dsmUrl:" ; sudo /opt/ds_agent/dsa_query -c GetComponentInfo | grep -i -e "Component.AM.driverOffline" -e "Component.AM.mode" -e "Component.CORE.version" -e "Component.AM.version.pattern.VSAPI" -e "Component.AM.cap.realtime" -e "Component.FWDPI.mode" -e "Component.IM.mode" ; systemctl -l status ds_agent ; echo "-------------------End-of-Armor-Troubleshooting-Script-Output-------------------"

This issue often occurs if a server has been powered off or the network has changed.

1. Run the following command to ensure that the AMSP service is running:

   Code Block

1. get-service -displayname "trend*"

2. If the service is running, you will see the following output:

   Code Block

1. > get-service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Running Amsp Trend Micro Solution Platform Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier

2. If the service is not running (stopped), then use the following command to start the Malware Protection agent and all other Malware Protection-related services:

   Code Block

1. get-service -displayname "trend*" | start-service

   Expand
   title Example Output
   Code Block theme Midnight > get-service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Stopped Amsp Trend Micro Solution Platform Stopped ds_agent Trend Micro Deep Security Agent Stopped ds_monitor Trend Micro Deep Security Monitor Stopped ds_notifier Trend Micro Deep Security Notifier > get-service -displayname "trend*" | start-service > get-service -displayname "trend*" Status Name DisplayName ------ ---- ----------- Running Amsp Trend Micro Solution Platform Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier

2. Run the following command to initiate a heartbeat to the Armor Malware Protection Infrastructure manually:

   Code Block

1. & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -m

2. Review the desired output. This will indicate that your virtual machine is able to connect to the Armor Malware Protection Infrastructure, and the agent will reach out to the Armor Malware Protection Infrastructure to update the status, as well as obtain policy updates and more:

   Code Block

1. > & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -m HTTP Status: 200 - OK Response: Manager contact has been scheduled to occur in the next few seconds.

   • In AMP, the not provided a heartbeat in the past 4 hours error message will be removed within an hour.

2. If this error message continues to display in AMP, run the following command as an administrator in PowerShell:

   Code Block

1. tnc -computername 3a.epsec.armor.com -port 4119; tnc -computername 3a.epsec.armor.com -port 4120; tnc -computername 3a.epsec.armor.com -port 4122

   Expand
   title Expected Output
   Code Block theme Midnight > tnc -computername 3a.epsec.armor.com -port 4119; tnc -computername 3a.epsec.armor.com -port 4120; tnc -computername 3a.epsec.armor.com -port 4122 ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4119 InterfaceAlias : Ethernet SourceAddress : 172.31.10.144 TcpTestSucceeded : True ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4120 InterfaceAlias : Ethernet SourceAddress : 172.31.10.144 TcpTestSucceeded : True ComputerName : 3a.epsec.armor.com RemoteAddress : 52.13.172.208 RemotePort : 4122 InterfaceAlias : Ethernet SourceAddress : 172.31.10.144 TcpTestSucceeded : True

   If you encounter a failure, you may have a firewall conflict that requires intervention.

   Port Information:

   • TCP Port 4119 is required for installation of the malware protection agent.

   • TCP Port 4120 is required for Heartbeats and communication to the Armor Malware Protection Infrastructure.

   • TCP Port 4122 is required for communication to Antimalware Infrastructure and updates.

2. If connectivity is successful and Armor Support has not yet been contacted, re-register the malware protection agent:

   Code Block

1. > C:\.armor\opt\armor add malwareprotection

2. If the error has not cleared, please contact Armor Support. Within the ticket, provide the information / results that you have gathered so far.

This issue often occurs if a server has been powered off, or if connectivity to the Armor Malware Protection Infrastructure has been blocked.

1. Assuming that the server is powered on, run the following command to ensure that the Malware Protection agent is running:

   Code Block

1. systemctl status ds_agent

2. Review the output to verify that there are 4 separate processes, including/opt/ds_agent/ds_agent and/opt/ds_agent/ds_am:

   Expand
   title Expected Output
   Code Block theme Midnight $ systemctl status ds_agent ? ds_agent.service - LSB: Trend Micro Deep Security Agent Loaded: loaded (/etc/rc.d/init.d/ds_agent; bad; vendor preset: disabled) Drop-In: /etc/systemd/system/ds_agent.service.d ??allow_exit.conf Active: active (running) since Fri 2019-08-23 16:26:19 EDT; 24h ago Docs: man:systemd-sysv-generator(8) Process: 29689 ExecStop=/etc/rc.d/init.d/ds_agent stop (code=exited, status=0/SUCCESS) Process: 1130 ExecStart=/etc/rc.d/init.d/ds_agent start (code=exited, status=0/SUCCESS) Main PID: 1151 (ds_agent) CGroup: /system.slice/ds_agent.service ??1151 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext ??1152 /opt/ds_agent/ds_agent -w /var/opt/ds_agent -b -i -e /opt/ds_agent/ext ??1272 /opt/ds_agent/ds_am -g ../diag -v 5 -d /var/opt/ds_agent/am -P 1 -R ??1289 /opt/ds_agent/ds_am -g ../diag -v 5 -d /var/opt/ds_agent/am -P 1 -R Aug 23 16:26:19 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Starting LSB: Trend Micro Deep Security Agent... Aug 23 16:26:19 ip-172-31-34-176.us-east-2.compute.internal ds_agent[1130]: Starting ds_agent: [ OK ] Aug 23 16:26:19 ip-172-31-34-176.us-east-2.compute.internal systemd[1]: Started LSB: Trend Micro Deep Security Agent.

3. If you do not find that these processes are running, then you may need to restart the ds_agent, or reinstall the malwareprotection agent.

4. To restart the ds_agent service, run the following command:

   Code Block

1. sudo systemctl stop ds_agent; sudo systemctl start ds_agent

2. To reinstall the malwareprotection agent, run the following command:

   Code Block

1. sudo /opt/armor/armor remove malwareprotection; sudo /opt/armor/armor add malwareprotection

2. If the ds_agent is running with all 4 expected processes, run the following command to manually heartbeat the agent:

1. Code Block
   sudo /opt/ds_agent/dsa_control -m

2. Review the following output for a successful heartbeat:

   Code Block

1. $ sudo /opt/ds_agent/dsa_control -m HTTP Status: 200 - OK Response: Manager contact has been scheduled to occur in the next few seconds.

2. If you do not see HTTP Status: 200 - OK, then you must test the connectivity to ensure that your firewall rules are working properly.

   There are two ways to test for connectivity:

   Option 1: From a Script File

   1. Navigate to a directory where your user can execute permissions, such as the user's home directory:

      • cd ~

   2. In this directory, create a new bash script file:

      • touch connectiontest.sh

   3. In the text editor of your choice, edit this file to include the entire connection test script:

      • nano connectiontest.sh

      • vim connectiontest.sh

      • emacs connectiontest.sh

   4. Save the file using the method dictated by your text editor of choice.

   5. Add the executable bit to the file:

      • chmod +x connectiontest.sh

   6. Execute the following script:

      • ./connectiontest.sh

   Option 2: Directly from BASH

   1. Type an open parenthesis:

      • (

   2. Hit the Enter key.

   3. Paste the entire connection test script.

   4. Hit the Enter key.

   5. Type a close parenthesis:

      • )

   6. Hit the Enter key to run script.

1. Code Block

1. language

1. bash

   #!/bin/bash hosts1=(api.armor.com) ports1=(443) for host in "${hosts1[@]}" do for port in "${ports1[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts2=(3a.epsec.armor.com) ports2=(4119 4120 4122) for host in "${hosts2[@]}" do for port in "${ports2[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts3=(1a.log.armor.com 2a.log.armor.com) ports3=(515) for host in "${hosts3[@]}" do for port in "${ports3[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts4=(1a.mon.armor.com 2a.mon.armor.com) ports4=(8443) for host in "${hosts4[@]}" do for port in "${ports4[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts5=(1a.rs.armor.com) ports5=(443) for host in "${hosts5[@]}" do for port in "${ports5[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts6=(endpoint.ingress.rapid7.com ca.endpoint.ingress.rapid7.com eu.endpoint.ingress.rapid7.com au.endpoint.ingress.rapid7.com ap.endpoint.ingress.rapid7.com) ports6=(443) for host in "${hosts6[@]}" do for port in "${ports6[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done hosts7=(s3.amazonaws.com s3.ca-central-1.amazonaws.com s3.eu-central-1.amazonaws.com s3.ap-northeast-1.amazonaws.com s3-ap-southeast-2.amazonaws.com) ports7=(443) for host in "${hosts7[@]}" do for port in "${ports7[@]}" do if echo "Connection test from AA User at $(uname -n)" 2>/dev/null > /dev/tcp/"$host"/"$port" then echo -e "\e[32mSuccessfully connected to "$host":"$port"" else echo -e "\e[31mFailed to connect to "$host":"$port"" fi done done echo -e "\e[0mTest completed."

   Note

   Running this test from a server that has the Armor Agent installed and registered on it will yield a different result than a machine that does not have the Armor Agent installed and/or registered: Expand title Expected Output from Registered Server Code Block theme Midnight Successfully connected to api.armor.com:443 Successfully connected to 3a.epsec.armor.com:4119 Successfully connected to 3a.epsec.armor.com:4120 Successfully connected to 3a.epsec.armor.com:4122 Successfully connected to 1a.log.armor.com:515 Failed to connect to 2a.log.armor.com:515 Successfully connected to 1a.mon.armor.com:8443 Failed to connect to 2a.mon.armor.com:8443 Successfully connected to 1a.rs.armor.com:443 Successfully connected to endpoint.ingress.rapid7.com:443 Successfully connected to ca.endpoint.ingress.rapid7.com:443 Successfully connected to eu.endpoint.ingress.rapid7.com:443 Successfully connected to au.endpoint.ingress.rapid7.com:443 Successfully connected to ap.endpoint.ingress.rapid7.com:443 Successfully connected to s3.amazonaws.com:443 Successfully connected to s3.ca-central-1.amazonaws.com:443 Successfully connected to s3.eu-central-1.amazonaws.com:443 Successfully connected to s3.ap-northeast-1.amazonaws.com:443 Successfully connected to s3-ap-southeast-2.amazonaws.com:443 Expand title Expected Output from Non-Registered Server Code Block theme Midnight Successfully connected to api.armor.com:443 Successfully connected to 3a.epsec.armor.com:4119 Successfully connected to 3a.epsec.armor.com:4120 Successfully connected to 3a.epsec.armor.com:4122 Failed to connect to 1a.log.armor.com:515 Failed to connect to 2a.log.armor.com:515 Failed to connect to 1a.mon.armor.com:8443 Failed to connect to 2a.mon.armor.com:8443 Failed to connect to 1a.rs.armor.com:443 Successfully connected to endpoint.ingress.rapid7.com:443 Successfully connected to ca.endpoint.ingress.rapid7.com:443 Successfully connected to eu.endpoint.ingress.rapid7.com:443 Successfully connected to au.endpoint.ingress.rapid7.com:443 Successfully connected to ap.endpoint.ingress.rapid7.com:443 Successfully connected to s3.amazonaws.com:443 Successfully connected to s3.ca-central-1.amazonaws.com:443 Successfully connected to s3.eu-central-1.amazonaws.com:443 Successfully connected to s3.ap-northeast-1.amazonaws.com:443 Successfully connected to s3-ap-southeast-2.amazonaws.com:443

2. If you still see one of the heartbeat errors, then contact Armor Support and paste into the ticket the output from the following command:

   Code Block

1. echo "-----------------Start-of-Armor-Troubleshooting-Script-Output-------------------" ; uptime ; sudo /opt/armor/armor show db | grep -i -e "coreinstanceid" -e "accountid" ; sudo /opt/ds_agent/dsa_query -c GetAgentStatus | grep -i -e "AgentStatus.pluginDownloadInProgress:" -e "AgentStatus.agentState:" -e "AgentStatus.dsmUrl:" ; sudo /opt/ds_agent/dsa_query -c GetComponentInfo | grep -i -e "Component.AM.driverOffline" -e "Component.AM.mode" -e "Component.CORE.version" -e "Component.AM.version.pattern.VSAPI" -e "Component.AM.cap.realtime" -e "Component.FWDPI.mode" -e "Component.IM.mode" ; systemctl -l status ds_agent ; echo "-------------------End-of-Armor-Troubleshooting-Script-Output-------------------"

This error usually resolves itself after the agent has heartbeated a few times; however, if it hasn't, then a manual update will be required.

1. As an administrator, open PowerShell.

2. Run the following command:

   Code Block

1. & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -U

   Expand
   title Expected output
   Code Block theme Midnight > & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -U HTTP Status: 200 - OK 'SecurityUpdate' process started. Response: <Message> <Response code='0' cmd='UpdateComponent'/> </Message>

   This will specifically request an update for security definitions from the Armor Malware Protection Infrastructure, and should resolve the error in about an hour.

2. If the above command failed, run the following commands IN ORDER to make sure the modules are set to be updated automatically:

   Code Block

1. & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -m "UpdateComponent:true" & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -m "UpdateConfiguration:true" & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_control" -m

2. If the issue still persists, then contact Armor Support. Within the ticket, be sure to provide the output from the previously run commands.

This error usually resolves itself after the agent has heartbeated a few times; however, if it hasn't, then a manual update will be required.

1. Run the following command:

   Code Block

1. sudo /opt/ds_agent/dsa_control -U

   Expand
   title Expected output
   Code Block theme Midnight $ sudo /opt/ds_agent/dsa_control -U HTTP Status: 200 - OK 'SecurityUpdate' process started. Response: <Message> <Response code='0' cmd='UpdateComponent'/> </Message>

2. This will specifically request an update for security definitions from the Armor Malware Protection Infrastructure, and should resolve the error in about an hour.

3. If the error is not resolved, run the following command to make sure the modules are set to be updated automatically:

   Code Block

1. sudo /opt/ds_agent/dsa_control -m "UpdateComponent:true" ; sudo /opt/ds_agent/dsa_control -m "UpdateConfiguration:true" ; sudo /opt/ds_agent/dsa_control -m

2. If you still see an error, then contact Armor Support. Within the ticket, paste the output from the following command:

   Code Block

1. echo "-----------------Start-of-Armor-Troubleshooting-Script-Output-------------------" ; uptime ; sudo /opt/armor/armor show db | grep -i -e "coreinstanceid" -e "accountid" ; sudo /opt/ds_agent/dsa_query -c GetAgentStatus | grep -i -e "AgentStatus.pluginDownloadInProgress:" -e "AgentStatus.agentState:" -e "AgentStatus.dsmUrl:" ; sudo /opt/ds_agent/dsa_query -c GetComponentInfo | grep -i -e "Component.AM.driverOffline" -e "Component.AM.mode" -e "Component.CORE.version" -e "Component.AM.version.pattern.VSAPI" -e "Component.AM.cap.realtime" -e "Component.FWDPI.mode" -e "Component.IM.mode" ; systemctl -l status ds_agent ; echo "-------------------End-of-Armor-Troubleshooting-Script-Output-------------------"

When installed for the first time, Windows requires a reboot to finalize the changes being made to the registry. If you reboot when the installation prompts you, then you should not receive this error.

If you do receive this error, it means too much time has passed between installation & rebooting, and you'll need to contact Armor Support to manually refresh your Malware Protection Agent status via the Armor Malware Protection Infrastructure.

1. Run the following command, and include the output within the ticket:

   Code Block

1. Write-Host "-----------------Start-of-Armor-Troubleshooting-Script-Output-------------------" ; systeminfo | Select-String "System Boot*" ; C:\.armor\opt\armor show db | Select-String -Pattern '(AccountId)|(CoreInstanceId)' ; & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_query" -c GetAgentStatus | Select-String -Pattern '\.(agentState|dsmUrl|pluginDownloadInProgress)' ; & $Env:ProgramFiles"\Trend Micro\Deep Security Agent\dsa_query" -c GetComponentInfo | Select-String -Pattern '(Component.AM.driverOffline)|(Component.AM.mode)|(Component.CORE.version)|(Component.AM.version.pattern.VSAPI)|(Component.AM.cap.realtime)|(Component.FWDPI.mode)|(Component.IM.mode)' ; Get-Service -displayname "trend*" | ft ; Write-Host "-------------------End-of-Armor-Troubleshooting-Script-Output-------------------"

   Expand
   title Expected output
   Code Block theme Midnight -----------------Start-of-Armor-Troubleshooting-Script-Output------------------- System Boot Time: 8/14/2019, 5:00:10 PM | AccountId | 3804 | | CoreInstanceId | 38a6a50a-0553-4f47-b628-912280ae7c8a | AgentStatus.agentState: green AgentStatus.dsmUrl: https://3a.epsec.armor.com:4120/ AgentStatus.pluginDownloadInProgress: false Component.AM.cap.realtime: true Component.AM.driverOffline: false Component.AM.mode: on Component.AM.version.pattern.VSAPI: 15.315.00 Component.CORE.version: 11.3 Component.FWDPI.mode: on-tap Component.IM.mode: real-time Status Name DisplayName ------ ---- ----------- Running Amsp Trend Micro Solution Platform Running ds_agent Trend Micro Deep Security Agent Running ds_monitor Trend Micro Deep Security Monitor Running ds_notifier Trend Micro Deep Security Notifier -------------------End-of-Armor-Troubleshooting-Script-Output-------------------