Page Comparison

In the Firewall screen, each entry in the table represents a single firewall rule; however, each firewall rule can contain several protocols (and ports).

You can combine related protocols (and ports)into a Service Group. For example, if you want to create a firewall rule to block three types of traffic, you do not have to create three separate firewall rules. Instead, you can combine the three types of traffic (protocols and ports) into a single, configurable Service Group. Then, when you create a firewall rule, you can pick the newly created Service Group.

Anchor
Create-a-service-group Create-a-service-group

Create a Service Group

...

In the Firewall screen, each entry in the table represents a single firewall rule; however, each firewall rule can contain several protocols (and ports).

1. In the Armor Management Portal (AMP), on the left-side navigation, click Security.

2. Click Firewall.

3. If you have virtual machines in various data centers, then in the top drop-down menu, select the desired data center.

4. Click Service Groups.

5. Click Actions, and then click New Group.

6. In Service Group Name, enter a descriptive name.

7. In Add Members To Group, enter the service or sub-protocol, and then click the plus ( + ) icon.

   • You must add at least one member.

   • You can add multiple members to a service group.

     Service or sub-protocol	Notes	Example
     Services (TCP, UDP, etc.)	You must enter a port number. These services are not case-sensitive.	tcp/80 TCP/80 Tcp/80 tCp/80
     Additional services (AARP, AH, etc.)	These additional services are not case-sensitive. Do not enter a port number with these additional services.	ATALK igmp Gre
     Sub-protocols (echo-reply, redirect, etc.)	You must enter icmp, followed by the specific sub-protocol. You must enter the sub-protocol in lower-case letters. Do not enter a port number.	icmp/source-host-isolated icmp/time-exceeded

     
     

8. Click

...

1. Create Group.

   • The newly created service group will appear at the bottom of the table.

Anchor
Edit-a-Service-Group Edit-a-Service-Group

Edit a Service Group

...

...

1. In the Armor Management Portal (AMP), on the left-side navigation, click Security.

2. Click Firewall.

3. If you have virtual machines in various data centers, then in the top drop-down menu, select the desired data center.

4. Click Service Groups.

5. Locate and place your cursor over the desired service group.

6. Click

...

1. Edit Service Group.

2. Make your changes, and then click

...

1. Update Group to save.

Anchor
Delete-a-Service-Group Delete-a-Service-Group

Delete a Service Group

...

1. In the Armor Management Portal (AMP), on the left-side navigation, click Security.

2. Click Firewall.

3. If you have virtual machines in various data centers, then in the top drop-down menu, select the desired data center.

4. Click Service Groups.

5. Locate

...

1. the desired service group

...

1. and click on the vertical ellipsis.

2. Click on Delete

...

1. .

...

Topics Discussed