Versions Compared

Old Version 27

changes.mady.by.user Luke Fritz (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Aaron Gabriel (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of Contents

Vulnerability Distribution by Severity

The Vulnerability Distribution by Severity report will show you the vulnerability by a severity number

Expand
titleClick for Steps...

  1. In AMP, go to the?Log Search?screen.

  2. Click on?Visualizations.

  3. Click the?Create new visualization?button.

  4. In the New Visualization pop up, select the?Pie Chart?visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

  8. Under metrics this should already be set to Y-axis Count. No change is needed.

  9. One bucket is needed to configure this visualization. Under Buckets, click the?Add?button, making sure to select?Split Slices.

  10. In the Aggregation drop down, select?Terms.

  11. In the?Field?box, enter "vulnerability.severity" or search for it.

  12. Order by, Order and Size should all remain with their default values. Properly configured, the bucket configuration will look like the screenshot below:
    Image Modified

  13. When the bucket is configured, click the?Apply Changes?button.

  14. Set the date range for the visualization.

  15. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  16. Save the visualization by clicking?Save?in the top left of the screen.

Users can view previous visualizations by clicking?Visualizations?and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Vulnerability by Host

The Vulnerability by Host report will show you the top vulnerabilities by hostname

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. 4 buckets are needed to configure this visualization.

  4. Bucket configuration for Bucket 1

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "host.ip" or search for it.

    4. Order by, Order and Size should all remain with their default values. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket configuration for Bucket 2

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "vulnerability.description" or search for it.

    4. Order by, Order and Size should all remain with their default values. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket configuration for Bucket 3

    1. Under Buckets, click the Add button, and select Split table.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "host.hostname" or search for it.

    4. Order by, Order and Size should all remain with their default values. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket configuration for Bucket 4

    1. Under Buckets, click the Add button, and select Split rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "vulnerability.score.base" or search for it.

    4. Set Order by to "Custom Metric"

    5. Set Aggregation to Count

    6. Order and Size should all remain with their default values. Properly configured, the fourth bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.


Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Vulnerability Distribution by First Found

The Vulnerability Distribution by First Found report will show you the vulnerabilities by the date they were first discovered.

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Pie Chart visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

    2. Partner accountId may be 1 or another number. Select the source matching the customer account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. One bucket is needed to configure this visualization. Under Buckets, click the Add button, making sure to select Split Slices.

  4. In the Aggregation drop down, select Date Histogram.

  5. In the Field box, enter "vulnerability.first_found" or search for it.

  6. Set the value in the Minimum interval box to Weekly

  7. A custom label of Week First Found can be added

  8. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.


Expand
titleClick for Example...

Image Removed

Image Added

Top 5 Hosts by Count of High Severity Vulnerabilities

The Top 5 Hosts by Count of High Severity Vulnerabilities report will show you the top 5 hosts by count of high severity vulnerabilities

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Vertical Bar visualization option.

  5. Choose a source

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Two filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below.

Image Removed

    1. Image Added

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. Two buckets are needed to configure this visualization.

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Terms.

  6. In the Field box, enter "host.hostname" or search for it.

  7. Order by, Order and Size should all remain with their default values. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. For the second bucket, click the Add button

  3. Select Split Series and In the Aggregation drop down, select Terms.

  4. In the Field box, enter "vulnerability.severity" or search for it.

  5. Order by = Alphabetical, Order and Size should all remain with their default values. A custom label of Severity can be added.

  6. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

  4. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  5. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Top 5 Hosts by Count of Vulnerabilities

The Top 5 Hosts by Count of Vulnerabilities report will show you the top 5 hosts by count of total vulnerabilities

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Vertical Bar visualization option.

  5. Choose a source

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Three filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below.

Image Removed

    1. Image Added

    2. Set the second filter up as seen below

Image Removed

    1. Image Added

    2. Set the last filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. Two buckets are needed to configure this visualization.

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Terms.

  6. In the Field box, enter "host.hostname" or search for it.

  7. Order by = Metric: Vulnerability Count by Severity

  8. Order = Descending

  9. Size can vary but for this example it is set to 200

  10. A custom lable of Hosts can be added

  11. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. For the second bucket, click the Add button

  3. Select Split Series and In the Aggregation drop down, select Terms.

  4. In the Field box, enter "vulnerability.severity" or search for it.

  5. Order by = Alphabetical, Order and Size should all remain with their default values. A custom label of Severity can be added.

  6. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Top 5 Hosts by Count of Net New Vulnerabilities

The Top 5 Hosts by Count of Net New Vulnerabilities report will show you the top 5 hosts by count of net new vulnerabilities

Expand
titleClick for Steps...

  1. Click on Visualizations.

  2. Click the Create new visualization button.

  3. In the New Visualization pop up, select the Vertical Bar visualization option.

  4. Choose a source

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  5. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  6. Two filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

    2. Set the second filter up as seen below

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. Two buckets are needed to configure this visualization.

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Terms.

  6. In the Field box, enter "host.hostname" or search for it.

  7. Order by, Order and Size should all remain with their default values. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. For the second bucket, click the Add button

  3. Select Split Series and In the Aggregation drop down, select Terms.

  4. In the Field box, enter "vulnerability.severity" or search for it.

  5. Order by should be set to Alphabetical, Order and Size can remain with their default values. A custom label of Severity can be added. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Vulnerabilities Sorted from First to Last Discovered

The Vulnerabilities Sorted From First to Last Discovered report will show you a data table of all vulnerabilities sorted from first to last by discovered date

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. 3 buckets are needed to configure this visualization.

  4. Bucket configuration for Bucket 1

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Date Histogram.

    3. In the Field box, enter "vulnerability.first_found" or search for it.

    4. In the Minimum Interval box, select Daily

    5. A custom label of First Report Containing Vulnerability can be set

    6. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket configuration for Bucket 2

    1. Under Buckets, click the Add button, and select Split rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "vulnerability.description" or search for it.

    4. Order by, Order should remain with their default values.

    5. Size can vary, but for this example it is set to 50

    6. A custom label of Vulnerability Description can be set

    7. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket configuration for Bucket 3

    1. Under Buckets, click the Add button, and select Split rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "vulnerability.id" or search for it.

    4. Order by = Alphabetical, Order and Size should all remain with their default values.

    5. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Vulnerability Distribution by OS

The Vulnerability Distribution by OS report will show you the vulnerabilities by Operating System type

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Pie Chart visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. One bucket is needed to configure this visualization. Under Buckets, click the Add button, making sure to select Split Slices.

  4. In the Aggregation drop down, select Terms.

  5. In the Field box, enter "host.os.full" or search for it.

  6. Order by, Order and Size should all remain with their default values.

  7. A custom label of Operating System can be set

  8. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Count of Vulnerabilities by Report Date

The Count of Vulnerabilities By Report Date report will show you a line graph of vulnerability count by report date

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Line visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

    2. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. One bucket is needed to configure this visualization

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Date Histogram.

  6. In the Field box, enter "@timestamp" or search for it.

  7. In the Minimum Interval box, select Daily

  8. A custom label of Vulnerability Report Date can be set

  9. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Count of High Severity Vulnerabilities by Report Date

The Count of High Severity Vulnerabilities By Report Date report will show you a line graph of the count of high severity vulnerabilities by date

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Line visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

    2. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Two filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below. You will have to manually type in "ecs-1.5.0-vulnerability in the Value field and click Save

Image Removed

    1. Image Added

    2. Set the second filter up as seen below. You will have to manually type in 3, 4 and 5. These are the severity levels

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. One bucket is needed to configure this visualization

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Date Histogram.

  6. In the Field box, enter "@timestamp" or search for it.

  7. In the Minimum Interval box, select Daily

  8. A custom label of Vulnerability Report Date can be set

  9. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Count of IDS Events

The Count of IDS Events report will show you a line graph count of IDS events

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Line visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  7. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  8. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "trend-hids" in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-axis Count. No change is needed.

  3. One bucket is needed to configure this visualization

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Date Histogram.

  6. In the Field box, enter "@timestamp" or search for it.

  7. In the Minimum Interval box, select Daily

  8. A custom label of Date can be set

  9. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  5. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Top 10 IDS Event Types

The Top 10 IDS Event Types report will show you a data table of the Top 10 types of IDS event

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Line visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "trend-hids" in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. One bucket is needed to configure this visualization

  4. Under Buckets, click the Add button and select Split rows

  5. In the Aggregation drop down, select Terms.

  6. In the Field box, enter "parsed.trendmicro.name" or search for it.

  7. Order by = Metric: Count, Order = Descending, Size = 10

  8. A custom label of IDS Event Type Name can be set

  9. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Top 5 Systems by IDS Event Count

The Top 5 Systems By IDS Event Count report will show you a vertical bar graph of the Top 5 systems by the total count of IDS events

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Vertical Bar visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the filter up as seen below. You will have to manually type in "trend-hids" in the Value field and click Save

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Y-Axis Count. No change is needed.

  3. One bucket is needed to configure this visualization

  4. Under Buckets, click the Add button and select X-Axis

  5. In the Aggregation drop down, select Terms.

  6. In the Field box, enter "hostname" or search for it.

  7. Order by, Order, & Size leave at default

  8. A custom label of Hostname can be set

  9. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

  1. Image Added

  2. When the bucket is configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...
Image Modified

Security - IPRM Location

The Security — IPRM Location report will show you a data table with geographic country locations and security event counts coming from each country

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Three filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below

Image Removed

    1. Image Added

    2. Set the second filter up as seen below

Image Removed

    1. Image Added

    2. Set the third filter up as seen below

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. One bucket is needed to configure this visualization.

  4. Bucket configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "src_geo.country_name" or search for it.

    4. Order = Descending and Size =10 (can vary depending on how long you want the list)

    5. A custom label of Location can be added

    6. Properly configured, the bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Windows Successful Logins

The Windows Successful Logins report will show you a data table listing hostname, timestamp and the message log for successful logins on Windows systems

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below. The value in Field is wineventlog.event_id

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. Three buckets are needed to configure this visualization.

  4. Bucket 1 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "@timestamp" or search for it.

    4. Order = Descending and Size =5 (can vary depending on how long you want the list)

    5. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 2 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "hostname" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 3 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "message" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

  4. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  5. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Windows Failed Logins

The Windows Failed Logins report will show you a data table listing hostname, timestamp and the message log for failed logins on Windows systems

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. One filter will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below. The value in Field is wineventlog.event_id

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. Three buckets are needed to configure this visualization.

  4. Bucket 1 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "@timestamp" or search for it.

    4. Order = Descending and Size =5 (can vary depending on how long you want the list)

    5. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 2 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "hostname" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 3 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "message" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Linux Successful Logins

The Linux Successful Logins report will show you a data table listing hostname, timestamp and the message log for successful logins on Linux systems

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Two filters will be applied to this visualization:

    1. Click on Add Filter

    2. Set the first filter up as seen below

Image Removed

    1. Image Added

    2. Set the second filter up as seen below

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. Three buckets are needed to configure this visualization.

  4. Bucket 1 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "@timestamp" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 2 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "hostname" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 3 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "message" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

Linux Failed Logins

The Linux Failed Logins report will show you a data table listing hostname, timestamp and the message log for failed logins on Linux systems

Expand
titleClick for Steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. In the New Visualization pop up, select the Data Table visualization option.

  5. Choose a source.

    1. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

      1. Partner accountId may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  6. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  7. Two

filters

  1. filters will be applied to this visualization:

    1. Click on Add filter

    2. Set the first filter up as seen below
      Image Modified

    3. Set the second filter up as seen below

Image Removed

    1. Image Added

  2. Under metrics this should already be set to Metric Count. No change is needed.

  3. Three buckets are needed to configure this visualization.

  4. Bucket 1 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "@timestamp" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the first bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 2 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "hostname" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the second bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. Bucket 3 configuration

    1. Under Buckets, click the Add button, and select Split Rows.

    2. In the Aggregation drop down, select Terms.

    3. In the Field box, enter "message" or search for it.

    4. Order = Descending and Size =1000 (can vary depending on how long you want the list)

    5. Properly configured, the third bucket configuration will look like the screenshot below:

Image Removed

    1. Image Added

  2. When the buckets are configured, click the Apply Changes button.

  3. Set the date range for the visualization.

    1. If the range encompasses more than one report, an additional filter with the report id can be added to narrow down the results if desired.

  4. Save the visualization by clicking Save in the top left of the screen.

Users can view previous visualizations by clicking Visualizations and selecting the desired visualization from the list.

Expand
titleClick for Example...

Image Removed

Image Added

PCI Flagged Vulnerabilities

Expand
titleClick for steps...

  1. In AMP, go to the Log Search

  2. Click on Visualizations.

  3. Click the Create new visualization

  4. Select "Create new visualization" and scroll down and select "Data Table"

  5. In sources, select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

  6. Partner account Id may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  7. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  8. Under "Buckets", select "Add" and then "Split Rows"

Image Removed

  1. Image Added

  2. Select "Terms" for the Aggregation, and type in "vulnerability.pci_flag" for the field and hit the blue arrow at the top of the box

Image Removed

  1. Image Added

  2. Next, select "+Add filter" , and type "vulnerability.description" for Field, "Exists" as the Operator and hit "Save"

Image Removed

  1. Image Added

  2. Add another filter by selecting ''+Add filter", and type ''vulnerability.pci_flag" for Field, and "is" for Operator. Type the number "1" in Value and hit "Save"

Image Removed

  1. Image Added

  2. Make sure to adjust the time if you are not getting any data to populate.

  3. Don't forget to save your Visualization at the top left.

Expand
titleExpand for example...

Image Removed

Image Added

CSPM: Failed by Severity

The CSPM: Failed by Severity visualization is a pie chart that displays failed reports by severity.

Expand
titleClick for steps...

  1. In AMP, go to the Log Search screen.

  2. Click on Visualizations.

  3. Click the Create new visualization button.

  4. Select "Create new visualization" and scroll down and select "Pie"

  5. Choose a

  6. In sources select <PARTNER_ACCT_ID>_<CUSTOMER_ACCT>_customer.

  7. Partner account Id may be 1 or another number. Select the source matching the account number in the top right corner of the AMP page or listed on the Account page followed by "_customer".

  8. Log Search will refresh to display the query screen. From here, the visualization can be configured.

  9. Click "Add filter" to filter to the failed report data:

  10. Type ''event.outcome" in Operator is ''is'', and Value is "FAIL". Then hit ''Save"

Image Removed

  1. Image Added


    1. (If you receive an error, change the time field to the last 30 days to expand your search)

  2. Navigate to Buckets, add bucket and select "Split slices"

Image Removed

  1. Image Added

  2. Aggregation= Terms, type ''event.severity'' for Field

Image Removed

  1. Image Added

    1. To confirm those changes, click the blue box with a triangle:

Image Removed

    1. Image Added

  2. Don't forget to save your Visualization at the top left

Expand
titleExpand for example...

Image Removed

Was this helpful?

...

Image Added