Versions Compared

Old Version 93

changes.mady.by.user Luke Fritz (Unlicensed)

Saved on

compared with

New Version 94

changes.mady.by.user Shilpa Setty

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note

To fully use this screen, you must have the following permissions assigned to your account:

  • Read Network IP

  • Write Network IP

  • Read Network NAT

  • Write Network NAT

You can use the IP Addresses screen to view and assign private and public IP addresses for your virtual machines.

Note

By default, IP addresses assigned to a virtual machine are private; however, you can request a public IP address.

Note

Armor offers one free public IP address per virtual machine. You can request additional public IP addresses for the same virtual machine at an additional cost.

Note

Additionally, there is a cost associated with a public IP address that is not assigned (routed) to a virtual machine / private IP address.

Excerpt


Private Section

Column

Description

Private IP

The private IP addresses allocated to your account.

State

  • Reserved (Assigned) - When the private IP address is assigned to a public IP address

  • Unassigned (Available) - When the private IP address is not assigned to a public IP address

  • Primary IP - The primary private IP address assigned to a virtual machine

  • Secondary IP - A secondary private IP address assigned to a virtual machine

Public IPs

The public IP address assigned to the private IP address

VM

The virtual machine associated with the private IP address

Workload

The workload where the virtual machine lives



Public Section

here

Column

Description

Public IP

The public IP addresses allocated to your account.

Note
T

There is a cost associated with a public IP address that is not assigned (routed) to a private IP address. If you have a public IP address listed in your account that is not assigned to a private IP address, Armor recommends that you remove that public IP address from your account.

To learn how to remove a public IP address from your account, see

Remove

IP Address#Remove an existing public IP address from a virtual machine.

State

The status of the public IP address with respect to your private IP addresses

  • Not Routed: When a public IP address is not assigned to a private IP address.

  • Routed: When a public IP address has been assigned to a private IP address.


Anchor
Request-a-new-public-IP-address
Request-a-new-public-IP-address
Assign a new public IP address to an existing virtual machine / private IP address

...

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click IP Addresses.

  3. If you have virtual machines in various data centers, then in the top menu, click the corresponding data center.

  4. Click Public.

  5. Click the plus ( + ) icon.

  6. Review the information under Environment and Quantity, and then click Add IP Addresses.

  7. Locate and hover over the newly created public IP address.

  8. Click the vertical ellipses.

  9. Click Assign to VM.

  10. In Virtual Machine, select the desired virtual machine.

  11. In IP Address, select an available private IP address.

  12. Click Create NAT.

    • This action may take a few minutes to complete.


Anchor
Assign-an-existing-public-IP-address-to-a-virtual-machine
Assign-an-existing-public-IP-address-to-a-virtual-machine
Assign an existing public IP address to an existing virtual machine / private IP address

...

Note

In this example, you will assign a public IP address that is displayed as Not Routed.

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click IP Addresses.

  3. If you have virtual machines in various data centers, then click the corresponding data center.

  4. Click Public.

  5. Locate and hover over the desired public IP address.

  6. Click the vertical ellipses.

  7. Click Assign to VM.

  8. In Virtual Machine, select the desired virtual machine.

  9. In IP Address, select the corresponding virtual machine.

  10. Click Create NAT.


Anchor
Remove-an-existing-public-IP-address-from-a-virtual-machine
Remove-an-existing-public-IP-address-from-a-virtual-machine
Unassign and remove an existing public IP address from a virtual machine / private IP address

...

Note

There is a cost associated with a public IP address that is not assigned (routed) to a virtual machine. After you unassign a public IP address, Armor recommends that you remove the unassigned IP address.

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click IP Addresses.

  3. If you have virtual machines in various data centers, then in the top menu, select the corresponding data center.

  4. Click Public.

  5. Locate and hover over the desired public IP address.

  6. Click the vertical ellipses.

  7. Click Remove NAT.

  8. Click Remove NAT again.

Note

If you do not plan to use this public IP address in the future, to avoid additional costs, Armor recommends that you remove the public IP address from your AMP account.

  1. In the Public section of the IP Addresses screen, locate and hover over the desired IP address.

  2. Click Relinquish IP.

  3. Click Relinquish IP again.


Anchor
Assign-an-available-private-IP-address
Assign-an-available-private-IP-address
Assign a secondary, available private IP address to an existing virtual machine / public IP address

...

Note

By default, new virtual machines are assigned a primary private IP address; however, you can assign a secondary private IP address.

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click IP Addresses.

  3. If you have virtual machines in various data centers, then in the top menu, select the corresponding data center.

  4. Locate and hover over the desired private IP address.

  5. Click the vertical ellipses.

  6. Click Assign to VM.

  7. In the drop-down menu, select the desired virtual machine, and then click Assign IP.


Anchor
Unassign-a-secondary-private-IP-address
Unassign-a-secondary-private-IP-address
Unassign a secondary private IP address from a virtual machine / public IP address

...

Note

You cannot unassign a primary private IP address from a virtual machine.

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure.

  2. Click IP Addresses.

  3. If you have virtual machines in various data centers, then in the top menu, select the corresponding data center.

  4. Locate and hover over the desired private IP address.

  5. Click the vertical ellipses.

  6. Click Remove IP from VM.

  7. Select Remove IP Assignment.

  8. You must also unassign the IP address within the virtual machine to complete the removal.



Related Documentation

Filter by label (Content by label)
showLabelsfalse
showSpacefalse
sorttitle
cqllabel in ( "virtual_machines" , "firewall_rules" , "ssl_vpn" , "advanced_backup" , "disaster_recovery" )




Was this helpful?



Topics Discussed

Table of Contents
maxLevel3
minLevel3