Page Comparison

Topics Discussed

You can use this document to send Fortinet Security Gateway logs to Armor's Security Information & Event Management (SIEM).

Pre-Deployment Considerations

...

To create a remote Log Relay, you must already have:

• A Log Relay server on your account

  • To learn how to add Log Relay to your account, see Obtain Log Relay for Remote Log Collection

• Configured the system clock

Log Relay IP Address

You must be able to retrieve the log relay IP address from your AMP account:

1. In the Armor Management Portal (AMP), in the left-side navigation, click Security.

2. Click Log & Data Management.

3. Click Agent Sources.

4. Locate and select the desired log relay.

5. Click Overview.

6. Locate and copy the Public IP.

Update your Fortinet Security Gateway

...

1. Log into your Fortinet Security Gateway.

2. In the upper, right corner, select CLI Console.
   

...

1. Image Added

...

1. Run the following commands to configure the device to send syslogs to Log Relay, which will then forward the logs to Armor.

   Code Block
   language bash

...

1. fgvm1 # config log syslogd setting fgvm1 (setting) # set status enable fgvm1 (setting) # set format default fgvm1 (setting) # set server <LOG_RELAY_IP_ADDRESS> fgvm1 (setting) # set port 10073 fgvm1 (setting) # end

   1. To validate your current configuration, run the following command, either before or after the [fgvm1 (setting) # end] command.

      Code Block
      language bash

...

1. 1. fgvm1 # show log syslogd setting

      Note
      If the format was set to something other than default, when the [fgvm1#show log syslogd setting] command is run, the current format will be returned (e.g. cef). Within the command line, update the format command to default [fgvm1 (setting)#set format default].

2. Verify that logs are formatted correctly, similar to either of the following examples:

   Note
   Fortigate can send messages in multiple formats.

...

1. Example 1

   Code Block
   Jul 9 14:26:58 13.47.22.124 date=2019-07-09 time=14:26:58 devname=XXX-FW1 devid=YYY logid=0000000013 type=traffic subtype=forward level=notice vd=root srcip=89.28.174.28 srcport=46796 srcintf="port9" dstip=13.47.22.175 dstport=1639 dstintf="port11" sessionid=2232272452 proto=6 action=deny policyid=0 policytype=policy

...

...

1. Example 2

   Code Block
   date=2019-07-09 time=14:26:58 devname=XXX-FW1 devid=YYY logid=0000000013 type=traffic subtype=forward level=notice vd=root srcip=89.28.174.28 srcport=46796 srcintf="port9" dstip=13.47.22.175 dstport=1639 dstintf="port11" sessionid=2232272452 proto=6 action=deny policyid=0 policytype=policy

   
   

Verify Logs in AMP

...

In the Armor Management Portal (AMP), you can view the actual logs to confirm that the configuration was successful.

1. In the Armor Management Portal (AMP), in the left-side navigation, click Security.

2. Click Log & Data Management, and then select Search.

3. In the search field, enter the IP address or the device name.

   • For example, you can enter *13.47.22.124* or *XXX-FW1*

   • This action will display collected FortiGate logs for that particular device.

1. • Example Output

show system interface ?

Additional Documentation

For more information on using CLI, click here.

...

Topics Discussed

Table of ContentsmaxLevel3minLevel3