Content Comparison

...

1. In the Armor user interface, on in the left-side navigation, click Infrastructure. 
2. Click L2L VPN.
3. If you have virtual machines in various data centers, then click the corresponding data center. 
4. Click New L2L.
5. In Tunnel Name, enter a descriptive name. 
6. In Encryption Mode, select an encryption mode. You can select between Advanced Encryption Standard or Data Encryption Standard. 
7. In Pre-Shared Key, click Generate or create your own key. You will use this key to securely connect to your local endpoint. 
   • If you create your own key, this key must contain the following requirements:
     • 16 to 96 characters
     • One lower-case letter
     • One upper-case letter
     • One number
8. In Remote Peer IP Address, enter your network's IP address. 
9. In Remote Host/Networks (CIDR), enter your host network, and then click the plus ( + ) sign. 
10. In Local Host/Networks (CIDR), enter your Armor account's host network, and then click the plus ( + ) sign. 
11. Click Save L2L. 

...

1. In the Armor user interface, on in the left-side navigation, click Infrastructure. 
2. Click L2L VPN.
3. If you have virtual machines in various data centers, then click the corresponding data center. 
4. Click the gear icon that corresponds to the desired L2L VPN tunnel, and then select Edit. 
5. Make your desired changes, and then click Save L2L. 
   
   
   

...

1. In the Armor user interface, on in the left-side navigation, click Infrastructure. 
2. Click L2L VPN.
3. If you have virtual machines in various data centers, then click the corresponding data center. 
4. Click the gear icon that corresponds to the desired L2L VPN tunnel, and then select Enable, Disable, or Delete.